Infographic Design Layout Tips for Non-Designers: 9 Rules to Organize Data Clearly

Joshua Byrum

Most infographics do not fail because the data is wrong. They fail because the reader does not know where to look first. The numbers are accurate, the icons are fine, the colours are pleasant, and yet the whole thing reads like a pile of boxes stacked on a page.

This guide collects the infographic design tips that actually control reading order: how to pick a grid, how much space to leave around charts, where labels belong, and how many colours you are allowed to use before the graphic stops communicating. Every rule includes the mistake we see most often and the exact fix, so you can audit a draft you already have instead of starting over.

No design degree required. If you can use Canva, Figma, Visme, PowerPoint or Google Slides, you can apply all nine rules today.

Before the rules: decide what the infographic is arguing

Every good infographic makes one point and uses the data to support it. Not three points. One. If your draft could be split into two separate graphics without losing anything, it should be.

Write that point as a single sentence before you open any tool. For example: “Small retailers lose most of their revenue in the 48 hours after an abandoned cart.” That sentence becomes your title, and every chart below it either supports that sentence or gets cut.

Layout is simply the order in which you deliver the evidence for that sentence. Everything below is about protecting that order.

infographic design layout

Rule 1: Map the reading path before you place a single element

Readers scan infographics top to bottom, in a narrow column, far more than they scan left to right. A tall single-column layout beats a wide collage almost every time, because it removes the decision of “what do I read next”.

The mistake

Four quadrants of equal visual weight, each with its own chart. The eye has no entry point, so it bounces, then leaves.

The fix

  • Use a single-column vertical flow as the default, around 800 to 1000 px wide and as tall as the story needs.
  • Give the graphic an obvious entry point: a large headline, then a short intro line of 15 to 25 words.
  • Number your sections if the order matters (process, timeline, step-by-step comparisons). Numbers remove ambiguity instantly.
  • Reserve side-by-side layouts for genuine comparisons only, such as “before vs after” or “option A vs option B”.

Rule 2: Choose one grid and never break it

A grid is just a set of invisible columns and consistent margins. It is the single biggest difference between amateur and professional-looking layouts, and it takes five minutes to set up.

The mistake

Elements placed by eye. One chart starts 40 px from the left edge, the next starts at 55 px, a caption sits at 48 px. Nothing is obviously wrong, but the page feels unstable.

The fix

Pick a simple column system and snap everything to it:

Infographic width Columns Outer margin Best for
800 px (vertical) 6 60 px Blog and newsletter embeds
1080 px (square) 4 80 px Social feeds, LinkedIn carousels
1200 px (wide) 12 96 px Reports, dashboards, print

Then apply the discipline: every title, chart, icon and caption starts on a column line. Left-align your text rather than centring it, because a shared left edge gives the eye a rail to follow down the page.

infographic design layout

Rule 3: Give each block one job

A block is a unit the reader consumes in one go: a heading, one visual, one short explanation. When a block contains two charts and three stats, the reader has to do the sorting work that you should have done.

The fix

  • One idea per block, one visual per idea.
  • Limit a vertical infographic to 5 to 7 blocks. More than that and you have a report, not an infographic.
  • Keep the explanatory text under 40 words per block. If the chart needs a paragraph, the chart is wrong.
  • Use a visible divider only if whitespace alone is not separating blocks clearly. Thin 1 px rules at 20 to 30 percent opacity are enough.

Rule 4: Space charts with a fixed scale, not by feel

Grouping happens through proximity. Elements that sit close together are read as related, whether you intended that or not. This is where most self-made infographics quietly fall apart: the gap between a chart and its caption is the same as the gap between two unrelated sections, so everything blurs.

The fix: an 8-point spacing scale

Gap Use it between
8 px A number and its unit, an icon and its label
16 px A chart and its caption or source note
32 px A section heading and its content
64 px or more Two separate sections

The rule to remember: the space between groups must be clearly larger than the space inside a group. If a reader cannot tell which caption belongs to which chart, your spacing is doing the opposite of its job.

Inside charts, the same logic applies. Bars in a bar chart should be spaced at roughly 40 to 60 percent of the bar width, so they read as a set rather than as isolated shapes.

infographic design layout

Rule 5: Put labels on the data, not in a legend

A legend forces the reader to look away from the chart, memorise a colour, look back and match it. Every round trip costs attention. Direct labelling removes that cost completely.

The mistake

A pie chart with six slices, a colour key underneath and no values on the chart itself.

The fix

  • Write category names next to the line, bar or slice they describe.
  • Put values at the end of bars (outside for short bars, inside for long ones) rather than on a separate axis.
  • If you must use an axis, drop the gridlines to a light grey and keep the labels horizontal. Rotated 45-degree labels are a sign the chart is too narrow or has too many categories.
  • Keep a legend only when the same colour code repeats across several charts. In that case, place it once, near the top, and keep the order identical in every chart.
  • Round aggressively. “38%” is read. “37.84%” is skipped.

Rule 6: Cap your colour coding at five categories

Colour is a coding system, not decoration. Readers can hold roughly five colour-to-meaning pairs in working memory. Past that, they stop decoding and start guessing.

The fix

  • Use one brand colour, one accent colour and a neutral grey as the base palette.
  • Grey out everything that is context and apply the accent colour only to the data point you want remembered. A single orange bar among seven grey bars says more than seven rainbow bars.
  • For ordered data (low to high, 2024 to 2026), use shades of one colour rather than different hues.
  • Never let the same colour mean two things in two different charts on the same graphic.
  • Check contrast: text on a coloured block should hit a ratio of at least 4.5:1, and roughly 8 percent of men cannot reliably separate red from green, so do not rely on hue alone. Add a label, a pattern or a position cue.

Quick colour audit

Convert your draft to greyscale. If you can still tell which element is the most important, your layout works. If everything flattens into the same tone, you were relying on colour to do the work that size, position and spacing should be doing.

infographic design layout

Rule 7: Build a type hierarchy with two fonts and four sizes

Typography is where non-designers over-invest. The reliable approach is boring and effective: pick two typefaces maximum, then create contrast with weight and size instead of with new fonts.

Level Size (on an 800 px wide graphic) Weight
Main title 42 to 56 px Bold
Section heading 24 to 30 px Semibold
Body and captions 14 to 18 px Regular
Source and footnotes 11 to 12 px Regular, grey

Other practical points:

  • Clean sans serif typefaces hold up best at small sizes and on screens. Save display fonts for the title only.
  • Use bold sparingly. If three words per block are bold, nothing is emphasised.
  • Keep line length between 40 and 70 characters. Wide full-bleed paragraphs are hard to track.
  • Avoid all caps for anything longer than a short label.

Rule 8: Keep comparisons honest and visually consistent

Layout decisions can distort data without you noticing, and a reader who spots a distorted chart stops trusting the whole graphic.

  • Bar charts always start at zero. Truncated axes exaggerate differences.
  • Scale circles and icons by area, not by diameter. Doubling the diameter quadruples the perceived size.
  • Use the same chart type for the same kind of comparison throughout the graphic.
  • Keep decimals consistent across all figures in a block.
  • Add the source and the period covered in small grey text at the bottom. In 2026, data provenance is what separates a shareable asset from one people ignore.
  • Do not use 3D effects, drop shadows on bars, or isometric pie charts. They add distortion and nothing else.

Match the chart to the question

What you want to show Use Avoid
Compare categories Horizontal bar chart Pie chart with 6+ slices
Change over time Line chart or column chart Stacked area with many layers
Part of a whole Stacked bar or 2 to 3 slice donut Multiple pies side by side
One headline number Large type with a short caption A chart with one data point
Process or sequence Numbered vertical steps Circular diagrams with arrows
infographic design layout

Rule 9: Test at thumbnail size and on a phone

Your infographic will first be seen as a small preview in a feed, an email or a search result. If it does not survive that, the layout never gets a second chance.

The three-test checklist

  1. Squint test: blur the graphic or step back two metres. The title and the single most important number should still be identifiable.
  2. Thumbnail test: shrink it to 25 percent. Headings should remain legible, body text does not have to be.
  3. Phone test: open it on an actual phone. If you have to pinch and zoom to read labels, increase body text or split the graphic into two.

Practical export notes: use PNG for graphics with flat colours and text, SVG when it will be embedded on a web page, and keep file size under roughly 500 KB so page speed does not suffer. Add descriptive alt text and repeat the key figures in the surrounding page copy, because search engines read your text, not the pixels in your image.

A 10-minute audit for an infographic you already made

  • Can you state the single point in one sentence? If not, cut a section.
  • Does everything align to the same left edge and the same column lines?
  • Is the gap between sections at least twice the gap inside a section?
  • Are there more than five colours carrying meaning?
  • Is there a legend you could replace with direct labels?
  • Do all bar charts start at zero?
  • Are there more than two typefaces?
  • Does the key number survive the squint test?
  • Is the source and date visible?

Fixing even half of these usually does more for comprehension than redrawing a single icon.

FAQ

What are the 7 types of infographics?

The commonly used categories are statistical, informational, timeline, process, geographic, comparison and hierarchical. Choose the type before you choose the layout, because each one implies a different reading path: process and timeline infographics are strictly sequential, while comparison infographics need parallel columns.

How do I create an easy infographic without design skills?

Start from the data, not from a template. Write your one-sentence point, list 5 to 7 supporting facts in order, choose one chart per fact, then drop that structure into a simple vertical template. Apply the grid, spacing and colour limits above. Editing a structured outline inside a template is far faster than trying to design freehand.

What is the best program to create infographics?

For non-designers, Canva and Visme are the quickest routes to a clean result because they ship with grid snapping and preset type scales. Figma offers more control over spacing and alignment if you are willing to learn it. Google Slides or PowerPoint work fine for internal use. The tool matters far less than whether you respect the layout rules.

How many colours should an infographic use?

Three to five, maximum. One primary, one accent for emphasis and one or two neutrals. Use shades of a single colour for ordered data instead of adding new hues.

How long should an infographic be?

For web and social use, aim for 800 to 1000 px wide and no more than roughly 3000 px tall, which is 5 to 7 content blocks. Longer graphics get truncated in feeds and are rarely read to the end. If you have more to say, publish two.

Should I include text on the page as well as in the image?

Yes. Search engines cannot read text baked into an image, so repeat your key statistics, the source and a short summary in the HTML around the embed, and always fill in the alt attribute. That is how an infographic earns traffic rather than just impressions.

Key takeaway

Good infographic design is less about illustration talent and more about sequence control. Pick a grid, give each block one job, space by a fixed scale, label directly, cap your colours, keep two fonts, and test small. Apply those rules to your next draft and the data will finally read in the order you intended.

Leave a Comment